Geosol India
HomeAboutProductsServicesQualityClientsGalleryCareersContact usSitemap
Large pond lined with black HDPE geomembrane

Lining & Containment

Impermeable barriers that last.

HDPE geomembrane lining

Geomembrane and clay-liner systems for water storage, waste containment and canals.

A lining system is a sequence of layers, and the membrane is one of them. The subgrade beneath, the cushion above it, the seams between sheets and the protective cover over it all decide whether the barrier holds.

We supply the sheet and the other layers, and our crews weld, test and record each seam.

D1

HDPE Geomembrane

High strength and chemical resistance; the standard for landfills, tailings and hazardous waste.

HDPE sheet is strong and resists a wide range of chemicals. Sheets are welded on site by hot-wedge or extrusion, and each seam is tested. HDPE is the usual liner for landfills, leachate ponds, tailings and process water. Thickness is chosen for the duty, the subgrade and the cover.

Large pond lined with black HDPE geomembrane
HDPE geomembrane lining
D2

LDPE Geomembrane

More flexible and easier to handle, for ponds, canals, tanks and secondary containment.

LDPE sheet is more flexible than HDPE and follows uneven ground with fewer wrinkles. It is easier to handle and deploy. It suits ponds, canals, tanks and secondary containment where the chemical duty is moderate and the geometry is awkward.

D3

Pond Liners

Reservoirs, retention basins, ornamental ponds and artificial streams.

Liners for water storage: farm ponds, reservoirs, retention basins, ornamental ponds and artificial streams. The liner is anchored in a trench at the crest and protected from sun and traffic. Edge details and side-slope angle are as important as the sheet.

Lined reservoir with a protected concrete edge and still water
Lined reservoir, protected edge
D4

GCL & Landfill Systems

Geosynthetic clay liners with drainage, protection and capping layers.

A geosynthetic clay liner is a layer of bentonite held between geotextiles. It seals by swelling when wet. In landfill base and capping systems it is combined with geomembrane, drainage and protection layers, so that each layer does one job. The layer order follows the regulatory design.

Typical lined section

Built in layers, top to bottom.

Seaming, protection layers and subgrade preparation matter as much as the sheet itself. Our crews weld, test and record every seam.

Protective coverSoil or granular layer againsttraffic and weatherGeotextile cushionPuncture protectionHDPE / LDPE geomembranePrepared subgradeCompacted, smooth and firm
Typical lined section. Not to scale.

Where this family works

Lined reservoir with a protected concrete edge and still water

Rivers, Canals & Irrigation

Bank protection, canal lining, check dams and pier scour protection.

Large pond lined with black HDPE geomembrane

Landfill & Environmental

Geomembrane lining, drainage and capping for waste facilities.

Reinforced soil wall with welded mesh face covered in climbing plants

Industrial & Urban

Retaining structures, ground improvement, ponds and pipeline protection.

Planning lining & containment works?

Send the plan or section, the soil or rock report and the design loads. We typically respond within one working day.

+91 90106 56333info@geosolindia.com

Send an enquiry